Torque Droidz Rotate firmware/stock rom to unbrick your phone

Hi to all, it’s been a very busy week for me that’s why I wasn’t able to post firmware. And today I will post another firmware and this firmware is for Torque Droidz Rotate.

I have already tried and tested this firmware.

Some pictures below are just an example of my previous post. Replace scatter file with the correct firmware that you downloaded.

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. Privacy Protection Password Lock up
7. Damage Apps (Force Closing)
8. Mount data error when hard resetting
9. Monkey Virus / Trojan Removal

Firmware Here –>Torque Droidz Rotate Part 1
Firmware Here –>Torque Droidz Rotate Part 2
Firmware Here –>Torque Droidz Rotate Part 3
Firmware Here –>Torque Droidz Rotate Part 4
Firmware Here –>Torque Droidz Rotate Part 5
VCOM Driver –>VCOM Manual

Alternative Driver –> AutoInstaller
SPFlashTool –> LatestVersion 

“When Downloading in DevHost make sure that your file is not in .exe format it should be a rar file. And don’t press DOWNLOAD, press DOWNLOAD NOW

“Use WinRar or 7zip to extract the firmware”
“Extract the files to your desired folder”
“If you encounter error in flashtool, use different version of it.”
“Please report dead links”
“I suggest to use 32bit Windows OS for compatibility of the driver”

“You can also use 64bit version, just disable driver signing or driver signature before installing the driver.”

“This is also working in Windows 10, just use the AutoDriverInstaller for the driver (32bit only, I have not tested on 64bit)”

Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:

  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button.
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)

More from my site

Leave a Comment