OFFICIAL KITKAT 4.4.2 for Gionee P3

This firmware compatible for : GIONEE P3 + POLYTRON W7430 + WALTON PRIMO GF + ALLVIEW A5 QUAD

This tutorial specific to that had great courage, because the process is rather complicated and uses a PC ..

And this tutorial for that still os jellybean or upgrade ever wear a flashable zip kitkat via CWM / CTR.

*IMPORTANT !!!

Before the upgrade , backup compulsory previous ROM & IMEI / nvram,

*Guide for flashing :

1. Install USB Driver for GIONEE P3, on your PC

2. Unpack the downloaded kitkat firmware, and double-click on Flashtool.exe

3. In Flashtool click on Scatter-loading , and select MT6582_Android_scatter.txt from the firmware folder
4. Scroll down, see the Preloader & others must be checked
5. Click download or firmware/upgrade button
6. Turn off your phone, remove battery, plug the usb cable from pc to your phone, insert battery…

7. The process of loading a red bar will run until the yellow color and end up with a green circle with a tick success

8. Remove battery, put it back & turn on your phone…
9. The boot-up at first time take a 4-5 minutes, so be patient…:)

10. Congratulations!! your phone is now running on kitkat 4.4.2 full OS

*I has updated this tutor because the last tutor have a wrong guides…:)

==================Have Fun & D.W.Y.O.R=================

*Thanks to :

> xda developers
> Marius Irlandezu (Gionee P3 Ph Facebook Group)
> All Androiders in the world
*Original Source : https://mega.co.nz/#!IVVzmRwT!5HxfN48Qge47ixFJJI3mE7nOCsmHBQLgNcWm4EqBHfk