Lenovo A3300-GV Stock ROM/Firmware to unbrick your tablet


Atlast Im finally done uploading the firmware / stock rom for A3300-GV ^_^

The stock for this tablet is not mine, I found this firmware/stock in a lenovo forum, so thank you for them for uploading the firmware/stock rom. As what I have read, the firmware is version 4.4.2 which is the KitKat version. The Stock ROM/firmware is fully working. The tablet has a MTK6582 cpu and I suggest that use the latest flash tool for this tablet.

Update: Confirmed that the file that I had uploaded is a Kitkat version 

Firmware Here –>Lenovo A3300GV
Firmware Part 2 –> Part 2
VCOM Driver –>VCOM Manual
Alternative Driver –> AutoInstaller

SPFlashTool –> LatestVersion 

“Use WinRar or 7zip to extract the firmware”
“Extract the files to your desired folder”
“If you encounter error in flashtool, use different version of it.”

“I suggest to use 32bit Windows OS for compatibility of the driver”

Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:

  1. Turn off your device or press the reset button near the sim card slot. (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your device and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)

More from my site


Leave a Comment