Intex Aqua Strong 5.1 Plus Official Stock Firmware

Intex Elyt E8 Plus MT6580 Android 5.1 Firmware Flash Files

Intex Aqua Strong 5.1 Plus Official Stock Firmware

Readme Once: Take a Backup: If you are going to flash the above Firmware on your Spreadtrum device, then take a backup of importantdata such as Contacts, Call logs, SMS, and other data as because your personal data will be deleted after flashing the stock firmware.

1- Backup your Call Log – Contacts – Sms – Etc With G Backup

2- Bin Packet load Error: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

3- How to Write IMEI: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

The firmware shared on this page is officiallyreleased by the company and helps you to recovery your Phone if you ever got bootloop, software error, update error, hanging,Unknown Baseband, IMEI Null and dead issue.

How To Flash Intex Aqua Strong 5.1 Plus With Spreadtrum Upgrade Tool :-

Download SPD Download ToolSpreadtrum Drivers. – Intex Aqua Strong 5.1 Plus V12 India SER

Setp 1. Install Spreadtrum Drivers.

Step 2. Install SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the .pac file, select it then click Open.

Step 7. The PACfile should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flashallfiles. Step 8. Click the Start downloading button.

Step 10. You should see Waiting…. under the Progressbar.

Step 11. Switch off the phone (still with battery inside) then connect it to the PC via USBcord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DONOTinterrupt.

Step 12. Once flashing is complete, you’ll see Passed.

Step 13. Click on the Stop downloading icon then disconnect the phone from PC and boot.

FollowDetailed Instruction Flashing With Spreadtrum Upgrade Tool.

Spread the love
NOTE: You can’t download pls contact to email [email protected] , i will sent link download for you

Donator is respected because they help us keep be the biggest Firmware library. Thank you very much!

More from my site