Intex Aqua Glow Stock Firmware ROM (flash file)

On this page I will share my true story about flashing a smartphone. And give firmware / stock ROM and complete tutorial on how to flash Intex Aqua Glow Use compatible and complete tools in an easier way. And you can download Firmware / stock rom via Mediafire Server which is not in limit and not in password. All the tutorials are free and I have tested myself all the problems like bootloop, softbrick, hardbrick, stuck logo / hang, successfully run smoothly and normal again.

Download Firmware

Download Firmware And Tolls

Intex Aqua Glow

Follow Tutorial

How to Flash Firmware

Step 1: you should download the firmware and prepare tools such as computers – usb cable – and internet network.

Step 2: After you finish downloading the zip file above now you extract it in a folder then you will find software, drivers, and firmware.

Step 3: Installing drivers is easier to do if you connect to the internet and connect the smartphone directly in download mode. if not please please install the driver manual in the zip file that you extracted earlier.

Step 4: Next you read link link below to go to tutorial page more complete with picture

Important Notes:

[*] Before you re-install your Smartphone please backup your important data, because it will delete all the contents of your internal storage, it will be safer if the SD Card and SIM Card are released. Flashing Smartphone using Software-firmware and Computer will not make your phone experience Hardbrick. If it fails there may be some missed step. Make sure the step by step you read carefully.

NOTE : You can’t download pls sent email to [email protected] , i will sent link download for you


More from my site