Galaxy A8 2018 MT6580 Clone Official Stock Firmware
Readme Once: Take a Backup: If you are going to flash the above Firmware on your Mtk device, then take a backup of importantdata such as Contacts, Call logs, SMS, and other data as because your personal data will be deleted after flashing the stock firmware.
The firmware shared on this page is officiallyreleased by the company and helps you to recovery your Phone if you ever got bootloop, software error, update error, hanging,Unknown Baseband, IMEI Null and dead issue.
How To Flash Galaxy A8 2018 MT6580 Clone With Sp Flash Tool:
- Extract And Run SPflashtool.
- Install MTK android USBdrivers.
- Then download Firmware file/Flashfile/Rom for your phone from below.
- switchoff your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in chargingsocket.
- Now open SP flash tool.exe.
- When SP flash tool open, go to downloadbutton in SP flash tool.
- In download tab, click on scatterload button.
- After locating the scatter tab, click on the downloadbutton.
- Now connect your smart phone with a USB cable and press volumeup or volumedown key for easy detection (remove and re insert your phone battery if it is removable)
- When flashing is completed, a greenring will appear in SP flash tool.
- Close SP flash tool on your computer and unplug phone.
- Power on the phone and enjoy.
- After flashing processstarts, it might take up to 5–10 minutes. So keep patience and wait.