Cherry Mobile Amethyst Stock Rom / firmware to unbrick your phone

This firmware is for Cherry Mobile Amethyst. You can download it below. I also have a tutorial that you can follow. Just understand and read it carefully. Videos and pictures are just example but the procedure is still the same.

You can fix the following issue in your phone:

1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. And other issues with your phones firmware

“DOWNLOAD THESE FILES”
Firmware Here –>Cherry Mobile Amethyst

VCOM Driver –>VCOM Manual
Alternative Driver –> AutoInstaller
SPFlashTool –> LatestVersion 

“Use WinRar or 7zip to extract the firmware”
“Extract the files to your desired folder” See picture below”
“If you encounter error in flashtool, use different version of it.”

“I suggest to use 32bit Windows OS for compatibility of the driver”

Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:

  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)

Leave a Comment