Oppo Joy R1001 stock rom/firmware to unbrick your phone

Hi,

This firmware is for  Oppo Joy or Oppo R1001, I acquired this firmware in a forum and I give credit to them for posting this firwmare. I was able to reflash this firmware in a dead Oppo Joy, and I can say that it is working.

This firmware is already rooted.

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. Privacy Protection Password Lock up

“DOWNLOAD THESE FILES”
Firmware Here –>Oppo Joy R1001 Part 1

Firmware Here –>Oppo Joy R1001 Part 2
Firmware Here –>Oppo Joy R1001 Part 3
Firmware Here –>Oppo Joy R1001 Part 4

VCOM Driver –>VCOM Manual
Alternative Driver –> AutoInstaller

SPFlashTool –> LatestVersion 

“Use WinRar or 7zip to extract the firmware”
“Extract the files to your desired folder”
“If you encounter error in flashtool, use different version of it.”
“I suggest to use 32bit Windows OS for compatibility of the driver”

“You can also use 64bit version, just disable driver signing or driver signature before installing the driver.”

Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:

  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button.
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)