Findrom - Needrom mobile for you

All mobi rom, rom cook, stock rom mobile

MyPhone Agua Storm Stock ROM / firmware to unbrick your phone

Hi,

This firmware is for MyPhone Agua Storm. I can assure that this firmware is working, because I have tried it myself. 

Sometimes after you flash your phone you will encounter an invalid IMEI or Baseband is damaged. I will also include the NVRAM that I had back-uped so you can also fix the DAMAGE Baseband or Unknown Baseband Issue.

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)

“DOWNLOAD THESE FILES”
Firmware Here –>MyPhone Agua Storm

NVRAM — > Damage Baseband Fix
VCOM Driver –>VCOM Manual
Alternative Driver –> AutoInstaller
SPFlashTool –> LatestVersion 

“Use WinRar or 7zip to extract the firmware”
“Extract the files to your desired folder” See picture below”
“If you encounter error in flashtool, use different version of it.”
“I suggest to use 32bit Windows OS for compatibility of the driver”

Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:

  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button.
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)