LG K10 Power Support

Loading...

Official Firmware/Flash File KDZ for LG K10 Power-

Download LG K10 Power Latest KDZ Firmware. if you own a LG K10 Power and want to Install official firmware on it then you are on Correct Place, in the page we share Latest official ROM for LG K10 Power in KDZ format, you can flash this ROM using the LG flash tools, this is a safe Method to Install official factory images on Lg devices, you can use provided firmware image to unbrick fix and to repair bootloop on LG K10 Power,

Note-

1. This Guide is Work only on Listed Phone please Don’t try it on any other Phone.

2. Make Sure Your Phone has at least 40-50% charge to prevent accidental Shut Down

3. Follow Steps correctly otherwise it cause bootloop, we are Not Responsible for any Damage,

Loading...

4. it will Erase all your Personal data so create a backup of your data if possible,

Require tools and Files-

File Name Downloads
LG Flash tools Download Now
Lg usb Driver Download Now
Firmware Below

Download:

  1. Select your Region and Download Here

How to Install official Firmware on LG K10 Power:

1. Extract/Unzip the LG Flash Tool .zip file that you downloaded above on your PC.
2. You’ll get a bunch of files required to run the program.
3. Double-click/Run LGFlashTool2014.exe file to Open LG Flash Tool.
4. If it doesn’t open, install Visual C++ Runtime Library from here and then try again.
5. Boot your LG device into Download Mode:
6. Power off your LG device.Press and hold Volume Up button.
7. Connect your device to PC with a USB cable while holding the Volume Up button.
8. You’ll boot into download mode with “Firmware Update” written on top of the screen.
9. Now load the .kdz firmware file into LG Flash Tool window on your PC. Click the browse button at the end of the “Select KDZ file” line. Leave every other option as is on the LG Flash Tool window.
11. Once you’ve selected .kdz firmware file, click “CSE Flash” button to proceed on flashing the .KDZ firmware to your LG device.
12. FYI, the “Normal Flash” button doesn’t wipe data and the “CSE Flash” button wipes data. If you’re upgrading from a stock firmware, then “Normal Flash” might do.
13. You’ll get a “Read Phone Information” window, it will be blank for the most part. Just hit the START button and proceed.
14. You’ll be asked for administrator permissions for some LG program on your PC, accept it.
15. Now you’ll see “Select Country & Language” window. Select “Different” from the country list and then “English” from the language list. And remember to NOT tick the Smartphone upgrade checkbox, it’s for Windows Mobile phones not your LG device running on Android.
16. To finally begin firmware flashing process, hit the “OK” button.
17. You’ll see a progress bar now. Just wait until it’s 100%, after which you might get an error “Connection to server failed”. This is okay. DON’T disconnect your phone at this point.
18. Watch your phone closely, you’ll see some activity going on the screen with “COM” written in green text. Once that happens click OK to the “Connection to server failed” error.
19. Now watch the firmware update progress bar on your phone. Once it’s complete, your phone will automatically reboot. And then you can disconnect your phone from PC and close the LG Flash Tool utility as well.

Loading...

Leave a Reply

avatar
  Subscribe  
Notify of