Findrom - Needrom mobile for you

All mobi rom, rom cook, stock rom mobile

Lenovo A5000 firmware/stock rom to unbrick your phone

Hi,

Warning– DO NOT PROCEED IF YOU UPGRADED YOUR PHONE IN LOLLIPOP. YOUR TOUCH EXPERIENCE WILL BE HORRIBLE. I REPEAT DO NOT PROCEED IF YOU ARE IN LOLLIPOP FIRMWARE.

UPDATE: ADDED firmware

UPDATE 2: If you are flashing the phone and then suddenly it stop or you accidentally remove/disconnected the USB cable. The only way to reflash your phone is to literally open the phone and remove the battery and connect it again. If you are also ROM dumping the firmware of this phone, and you accidentally removed the USB cable you are going to open the phone.

This firmware is for Lenovo A5000 firmware. I found this firmware in Lenovo A5000 group in facebook. I thank their group for this file.

I already tested this firmware and it is fully working.

Some pictures below are just an example of my previous post. Replace scatter file with the correct firmware that you downloaded.

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. Privacy Protection Password Lock up

“DOWNLOAD THESE FILES”
Firmware Here –>Lenovo A5000_S025_Kitkat
Firmware Here –>Lenovo A5000_S030_Kitkat
Firmware Here –>Lenovo A5000_S119_Lollipop
VCOM Driver –>VCOM Manual

Alternative Driver –> AutoInstaller
SPFlashTool –> LatestVersion 

“Use WinRar or 7zip to extract the firmware”
“Extract the files to your desired folder”
“If you encounter error in flashtool, use different version of it.”
“I suggest to use 32bit Windows OS for compatibility of the driver”

“You can also use 64bit version, just disable driver signing or driver signature before installing the driver.”

Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:

  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button.
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)