Download iVOOMi Me 3 Firmware

Are you looking for the stock ROM firmware of your device iVOOMi Me 3? If yes your answer, you are on the right page. We have given the direct link to download iVOOMi Me 3 firmware.

Download iVOOMi Me 3 stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool, and the scatter file.

Download iVOOMi Me 3 Firmware

Download iVOOMi Me 3 Firmware

Stock ROM File Name: Ivoomi_Me_3_MT6737M_IN01_20170623.zip

Stock ROM File Size: 1 GB

Android OS Version: 5.1.1

Download Now

Stock ROM File Name: Ivoomi_Me_3_MT6737M_IN04_20170901.zip

Stock ROM File Size: 1 GB

Android OS Version: 5.1.1

Download Now

How To Flash Stock ROM Firmware On iVOOMi Me 3

Step 1: Download the stock ROM zip file given above and extract it on your computer. You will find SP flash tool and Android scatter file after extracting.

Step 2: Now download iVOOMi Me 3 USB driver and install it on your computer. In case if you have already installed USB driver on your computer skip this step.

Step 3: Next, switch off your iVOOMi Me 3 smartphone and remove the battery (it is removable).

power-off-android

Step 4: Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe” file in it. Launch it.

stock-rom-flash-process

Step 5: Once SP Flash tool is launched, click on “Download” tab.

stock-rom-flash-process-2

Step 6: Now, click on “scatter-loading” button in the download tab.

stock-rom-flash-process-3

Step 7: Next, click on “Open Scatter File” and select the scatter file from Step 1. For reference see the image given below.

stock-rom-flash-process-4

Step 8: Now click on the “Download” button to start the flashing process.

stock-rom-flash-process-5

Step 9: Next, connect your iVOOMi Me 3 Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button.

Step 10: The flashing process will begin momentarily, and it will get completed in a minute or two. Once it is over, you will see the “Download OK” green ring in SP Flash Tool.

download-ok-green-ring

Step 11: Now, close SP Flash tool on your computer and unplug your smartphone.

That’s it. Now you have successfully flashed stock ROM firmware on your iVOOMi Me 3 Android device. If you encounter any issues while following this tutorial, do let me know via comments.

Rate This Post:

[Total: 0 Average: 0]

Loading...

More from my site