Cube i15-TCL Dual OS

@echo off

@rem This script is called by x:WindowsSystem32Startnet.cmd – WinPE

@echo.

@echo.

@echo.

@echo.

@rem *******************************************************************

@rem FLASH_BIOS=1 Auto flash BIOS / FLASH_BIOS=0 Do not auto flash BIOS

@rem *******************************************************************

@echo.

set FLASH_BIOS=0

@echo.

@echo Running Intel Optimization powercfg for improved imaging times

@echo.

@echo call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c

call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c

@echo.

@echo.

@echo.

@rem *****************************************************************

@rem List all the disks, then search the volumes of each one to see

@rem which disks may have “Winpe” in the label. We will ignore that

@rem disk and use the first disk without the Winpe label that we find.

@rem *****************************************************************

@echo.>x:Listdisk.txt

@echo list disk>>x:Listdisk.txt

@echo exit>>x:Listdisk.txt

@echo call diskpart /s x:Listdisk.txt

call diskpart /s x:Listdisk.txt>x:Disks.txt

@echo.

@rem Set Disk equal to blank to start

set disk=

@echo.

@rem

@rem This line will write a diskpart script to select the disk and detail it’s contents.

@rem We use this output to find a disk that does NOT have Winpe as the volume label.

@rem That disk will have the OS installed to it. This way you can exclude USB from diskpart.

@rem

@rem This works around the issue where the USB key is sometimes enumerated as disk 0 and the

@rem SSD is disk 1.

@rem

for /f “skip=8 tokens=2” %%A in (x:Disks.txt) do (

@echo sel disk %%A>x:Par.txt

@echo det disk>>x:Par.txt

@echo exit>>x:Par.txt

if NOT “%%A”==”DiskPart…” call :ListPar %%A

)

if %Disk%==”” echo No disk found without a volume label of “Winpe”&& set disk=0

@echo Using Disk “%Disk%”

@echo.

@echo *****************************************************************

@rem Map drive letter for Install.wim and Winre.wim

@echo *****************************************************************

@rem Create an output file containing all the drive letters

@echo.>x:listVol.txt

@echo list volume>>x:listVol.txt

@echo exit>>x:listVol.txt

@echo call diskpart /s x:listVol.txt

call diskpart /s x:Listdisk.txt>x:Output.txt

@echo call diskpart /s x:listVol.txt>x:Output.txt

diskpart /s x:listVol.txt>x:Output.txt

@echo.

@rem Go through each drive letter, looking for the imagesInstall.txt file

for /f “skip=8 tokens=3” %%A in (x:Output.txt) do (

if exist %%A:imagesinstall.txt set InstallPath=%%A:images&& echo “Found device with images folder and install.txt file”

)

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Checkup SingleOS or DualOS or whether exist windows partiton

@echo *****************************************************************

@rem create diskpart script for search windows partitions from emmc disk

@echo.>x:ListPar.txt

@echo select disk “%Disk%” >>x:ListPar.txt

@echo list partition >>x:ListPar.txt

@echo exit >>x:ListPar.txt

@echo.

@rem run diskpart script

diskpart /s x:ListPar.txt >x:eMMCPar.txt

@echo.

@rem SingleOS / DualOS switch

find “Partition 6” x:eMMCPar.txt >nul

if %ERRORLEVEL% NEQ 0 Goto :SingleOS

@rem ensure it’s DualOS,and check whether exist windows partition,if not:create the new windows partition

find “Partition 12” x:eMMCPar.txt >nul

if %ERRORLEVEL% NEQ 0 Goto : DualOS

@echo.>x:checkpart.txt

@echo select disk “%Disk%”>>x:checkpart.txt

@echo list partition>>x:checkpart.txt

@echo exit>>x:checkpart.txt

@echo call diskpart /s x:checkpart.txt>x:outpar.txt

call diskpart /s x:checkpart.txt>x:outpar.txt

@echo.

@echo.>x:DelPar.txt

@echo select disk “%Disk%”>>x:DelPar.txt

for /f “skip=21 tokens=2” %%A in (x:outpar.txt) do (

if %%A NEQ DiskPart… echo select partition %%A>>x:DelPar.txt && echo delete partition override>>x:DelPar.txt

)

echo exit>>x:DelPar.txt

diskpart /s x:DelPar.txt

Goto : DualOS

:SingleOS

@echo.

@echo This is a SingleOS!

@echo.

@echo.

:UEFImode

@echo.

@rem ************************

@rem UEFI SECTION

@rem ************************

@echo The PC is booted in UEFI mode

@echo.>x:winpart.txt

@echo select disk “%Disk%”>>x:winpart.txt

@echo clean>>x:winpart.txt

@echo convert gpt>>x:winpart.txt

@echo create partition efi size=100>>x:winpart.txt

@echo format quick fs=fat32 label=”System”>>x:winpart.txt

@echo assign letter=”S”>>x:winpart.txt

@echo create partition msr size=16>>x:winpart.txt

@echo create partition primary>>x:winpart.txt

@echo format quick fs=ntfs label=”Windows”>>x:winpart.txt

@echo assign letter=”W”>>x:winpart.txt

@echo shrink desired=500>>x:winpart.txt

@echo create partition primary>>x:winpart.txt

@echo format quick fs=ntfs label=”Recovery”>>x:winpart.txt

@echo assign letter=”R”>>x:winpart.txt

@echo set>>x:winpart.txt

@echo gpt attributes=0×8000000000000001>>x:winpart.txt

@echo exit>>x:WinPart.txt

@echo Winpart.txt now contains…..

@echo.

type x:winpart.txt

@echo.

@echo.

@echo *****************************************************************

@echo Setting up the partition table

@echo *****************************************************************

@echo call diskpart /s x:winpart.txt

diskpart /s x:winpart.txt

@echo.

@echo.

@echo.

@echo.

@rem Check InstallPath was found and there are images in it.

if NOT EXIST %InstallPath%Install.wim echo “Install.wim NOT found.” && goto :Error

@echo Install.wim FOUND at %InstallPath%imagesinstall.wim

@echo.

@echo.

@echo.

@echo *****************************************************************

@rem Switches to the USB disk

@rem Create folders on local (eMMC) disk and copy files from USB disk

@echo *****************************************************************

@echo.

@echo Making directories…

md w:recyclerscratch

if %errorlevel% NEQ 0 echo “Failed to make w:recyclerscratch directory” && goto :error

@echo.

md r:recoverywindowsre

if %errorlevel% NEQ 0 echo “Failed to make m:recoverywindowsre directory” && goto :error

@echo.

@echo.

@echo *****************************************************************

@echo Applying the Windows image from the USB

@echo *****************************************************************

@echo call dism /apply-image /imagefile:”%InstallPath%Install.wim” /index:1 /applydir:w: /compact /scratchdir:”w:recyclerSCRATCH

call dism /apply-image /imagefile:”%InstallPath%Install.wim” /index:1 /applydir:w: /compact /scratchdir:”w:recyclerSCRATCH

if %errorlevel% NEQ 0 echo “Failed to apply image to w:” && goto :error

@echo.

@echo *****************************************************************

@echo Rund SingleInstance

@echo *****************************************************************

@echo.

if EXIST W:RecoveryCustomizationsUSMT.ppkg dism /Apply-CustomDataImage /CustomDataImage:W:RecoveryCustomizationsUSMT.ppkg /ImagePath:W: /SingleInstance

@echo *****************************************************************

@rem Move WinRE to Recovery Partition

@echo *****************************************************************

@echo.

@echo Modifying attributes of winre.wim so we can move it.

attrib w:WindowsSystem32recoverywinre.wim -s -h -a -r

@echo move w:WindowsSystem32recoverywinre.wim r:recoverywindowsre

move w:WindowsSystem32recoverywinre.wim r:recoverywindowsre

if %errorlevel% NEQ 0 echo “Failed to move winre.wim to r:recoverywindowsre” && goto :error

@echo.

@echo reset attributes now

attrib r:RecoveryWindowsrewinre.wim +s +h +a +r

@echo.

@echo.

@echo *****************************************************************

@echo Setting the boot environment

@echo *****************************************************************

@echo call w:WINDOWSSYSTEM32BCDBOOT w:WINDOWS /s s: /f all

w:WINDOWSSYSTEM32BCDBOOT w:WINDOWS /s s: /f all

if %errorlevel% NEQ 0 echo “Failed to set boot information” && goto :error

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Setting the recovery environment

@echo *****************************************************************

@echo w:windowssystem32reagentc /SetREImage /Path r:RECOVERYWINDOWSRE /target w:windows

w:windowssystem32reagentc /SetREImage /Path r:RECOVERYWINDOWSRE /target w:windows

if %errorlevel% NEQ 0 echo “Failed to set recovery information” && goto :error

@echo.

@echo.

@echo.

@echo.

attrib +H +R W:Recovery

rmdir /s /q w:recycler

if “%FLASH_BIOS%”==”1” GOTO :FLASH_BIOS

@echo *****************************************************************

@echo WIMboot image deployment COMPLETE. Type EXIT from Command

@echo Prompt to restart or turn off device.

@echo *****************************************************************

Wpeutil shutdown

color 2f

Goto :END

: DualOS

@echo.

@echo This is a DualOS!

@echo.

@echo.

@echo *****************************************************************

@echo Write the diskpart script now that we know what disk to use

@echo *****************************************************************

@echo.>x:winpart.txt

@echo select disk “%Disk%”>>x:winpart.txt

@echo select volume “0”>>x:winpart.txt

@echo attributes volume set hidden>>x:winpart.txt

rem @echo select volume “1”>>x:winpart.txt

rem @echo attributes volume set hidden>>x:winpart.txt

@echo create partition efi size=100>>x:winpart.txt

@echo format quick fs=fat32 label=”System”>>x:winpart.txt

@echo assign letter=”S”>>x:winpart.txt

@echo create partition msr size=16>>x:winpart.txt

@echo create partition primary>>x:winpart.txt

@echo format quick fs=ntfs label=”Windows”>>x:winpart.txt

@echo assign letter=”W”>>x:winpart.txt

@echo shrink desired=500>>x:winpart.txt

@echo create partition primary>>x:winpart.txt

@echo format quick fs=ntfs label=”Recovery”>>x:winpart.txt

@echo assign letter=”M”>>x:winpart.txt

@echo set>>x:winpart.txt

@echo gpt attributes=0×8000000000000001>>x:winpart.txt

@echo exit>>x:WinPart.txt

@echo.

@echo winpart.txt now contains…..

@echo.

type x:winpart.txt

@echo.

@echo.

@echo *****************************************************************

@echo Setting up the partition table

@echo *****************************************************************

@echo call diskpart /s x:winpart.txt

diskpart /s x:winpart.txt

@echo.

@echo.

@echo.

@echo.

@rem Check InstallPath was found and there are images in it.

if NOT EXIST %InstallPath%Install.wim echo “Install.wim NOT found.” && goto :Error

@echo Install.wim FOUND at %InstallPath%install.wim

@echo.

@echo.

@echo.

@echo *****************************************************************

@rem Switches to the USB disk

@rem Create folders on local (eMMC) disk and copy files from USB disk

@echo *****************************************************************

@echo.

@echo Making directories…

md w:recyclerscratch

if %errorlevel% NEQ 0 echo “Failed to make w:recyclerscratch directory” && goto :error

@echo.

md M:recoverywindowsre

if %errorlevel% NEQ 0 echo “Failed to make M:recoverywindowsre directory” && goto :error

@echo.

@echo.

@echo *****************************************************************

@echo Applying the Windows image from the USB

@echo *****************************************************************

@echo call dism /apply-image /imagefile:”%InstallPath%Install.wim” /index:1 /applydir:w: /compact /scratchdir:”w:recyclerSCRATCH

call dism /apply-image /imagefile:”%InstallPath%Install.wim” /index:1 /applydir:w: /compact /scratchdir:”w:recyclerSCRATCH

if %errorlevel% NEQ 0 echo “Failed to apply image to w:” && goto :error

@echo.

@echo *****************************************************************

@echo Rund SingleInstance

@echo *****************************************************************

@echo.

if EXIST W:RecoveryCustomizationsUSMT.ppkg dism /Apply-CustomDataImage /CustomDataImage:W:RecoveryCustomizationsUSMT.ppkg /ImagePath:W: /SingleInstance

@echo *****************************************************************

@rem Move WinRE to Recovery Partition

@echo *****************************************************************

@echo.

@echo Modifying attributes of winre.wim so we can move it.

attrib w:WindowsSystem32recoverywinre.wim -s -h -a -r

@echo move w:WindowsSystem32recoverywinre.wim M:recoverywindowsre

move w:WindowsSystem32recoverywinre.wim M:recoverywindowsre

if %errorlevel% NEQ 0 echo “Failed to move winre.wim to M:recoverywindowsre” && goto :error

@echo.

@echo reset attributes now

attrib M:RecoveryWindowsrewinre.wim +s +h +a +r

@echo.

@echo.

@echo *****************************************************************

@echo Setting the boot environment

@echo *****************************************************************

@echo call w:WINDOWSSYSTEM32BCDBOOT w:WINDOWS /s s: /f all

w:WINDOWSSYSTEM32BCDBOOT w:WINDOWS /s s: /f all

if %errorlevel% NEQ 0 echo “Failed to set boot information” && goto :error

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Setting the recovery environment

@echo *****************************************************************

@echo w:windowssystem32reagentc /SetREImage /Path M:RECOVERYWINDOWSRE /target w:windows

w:windowssystem32reagentc /SetREImage /Path M:RECOVERYWINDOWSRE /target w:windows

if %errorlevel% NEQ 0 echo “Failed to set recovery information” && goto :error

attrib +H +R W:Recovery

rmdir /s /q w:recycler

if “%FLASH_BIOS%”==”1” GOTO :FLASH_BIOS

@echo *****************************************************************

@echo WIMboot image deployment COMPLETE. Type EXIT from Command

@echo Prompt to restart or turn off device.

@echo *****************************************************************、

Wpeutil shutdown

color 2f

Goto :END

:FLASH_BIOS

@echo.

@echo *****************************************************************

@echo Flash BIOS

@echo *****************************************************************

@echo.

@echo BIOS file FOUND at %WinPESource%ImagesBIOS*.ROM

@echo.

xcopy /y %WinPESource%ImagesBIOS*.ROM %WinPESource%ScriptsTools

for /r “%WinPESource%ScriptsTools” %%Z in (*.ROM) do (

ren “%%Z” “%%~na.fd”

)

if NOT EXIST %WinPESource%ScriptsTools*.fd echo “Can not find the BIOS file” && goto :error

@REM Flash BIOS

%WinPESource%ScriptsToolsH2OFFT-W.exe

Del /q %WinPESource%ScriptsTools*.fd

if %errorlevel% NEQ 0 echo “Failed to flash BIOS” && goto :error

@echo *****************************************************************

@echo WIMboot image deployment COMPLETE. Type EXIT from Command

@echo Prompt to restart or turn off device.

@echo *****************************************************************

color 2f

Goto :END

:ERROR

@echo.

@echo An error has been detected.

color 4f

@echo.

goto :END

:ListPar

@REM This section is to bring a disk number and use it to List Partitions

@echo.

set TempDisk=%1

diskpart /s x:Par.txt>x:ParOutput.txt

for /f “skip=24 tokens=3” %%A in (x:ParOutput.txt) do (

if /i “%%A”==”no” set Disk=%TempDisk%

)

for /f “skip=26 tokens=4” %%A in (x:ParOutput.txt) do (

if /i NOT “%%A”==”Winpe” set Disk=%TempDisk%

)

Goto :EOF

:END

@rem

@rem Get finish time so we can evaluate total WinPE phase time.

@rem

call |time>x:StopTime.txt

@rem

@rem Now parse both files to display the Start and Finish Time

@rem

@echo.

@echo.

for /f “tokens=5” %%A in (x:starttime.txt) do echo Script Start Time is %%A

for /f “tokens=5” %%A in (x:stoptime.txt) do echo Script Stop Time is %%A

@echo.

Loading...

More from my site