BS Mobile Wind firmware/stock rom to unbrick your phone

Hi,

This firmware is for  BS Mobile WIND, I have already tried and tested this firmware. Use it only in Miraclebox as I recovered the phone using Miraclebox. SPFlashTool did not work for me.

I did not back up this firmware. Who ever did thank you for uploading this file. 

This firmware is already rooted. Make sure to restore the NVRAM which is located in the firmware folder. You can restore the NVRAM by following my tutorial below.

All pictures below are just an example. 

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. Privacy Protection Password Lock up

“DOWNLOAD THESE FILES”
Firmware Here –>BS Mobile Wind

VCOM Driver –>VCOM Manual
Alternative Driver –> AutoInstaller
“Use WinRar or 7zip to extract the firmware”
“Extract the files to your desired folder”
“If you encounter error in flashtool, use different version of it.”
“I suggest to use 32bit Windows OS for compatibility of the driver”

“You can also use 64bit version, just disable driver signing or driver signature before installing the driver.”

Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:

  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button.
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)